Operation instructions
7.1 Application recommendations
7
Page 9
Note:
The following recommendations are only guidelines and must, of course, be
adapted to the patient's individual situation.
Gel pads
Note:
Conductive gel
Treatment time:
Dosage:
Note:
enShock comes with 8 gel pads to ensure an optimal penetration depth. The
penetration depth in human tissue depends on the gel pad used. The diameter
of the gel pads reflects the penetration depth. Example: a gel pad with a
diameter of 20 mm leads to a maximum energy level at a depth of 20 mm. The
diameter of the gel pad can be read on the gel pad in question.
For a longer service life, we recommend storing the gel pads out of direct
sunlight and at a temperature of between 1°C and 30°C.
Optimal energy transfer can only be guaranteed when conductive gel is used.
Depending on the size of the treatment area and the disease status, the
recommended treatment time is between 5 and 20 minutes.
It is recommended to start with a low dose and to increase it until the patient
develops a clear perception of the shock waves.
The patient should be carefully monitored during therapy.