9
6.1 LED status display
The LED display is provided on each submodule. The left module with the network sockets is the basic module. The right
module with the digital IO is the IO module.
6.1.1 Basic module LED display
Name
Status
Function
Continuous light
• Supply voltage OK
Flashing
• HMI is connected, the SCM is teaching the IO-Link device.
Flashing
• HMI assumes control, the IO module LEDs are off.
off
• Supply voltage not OK
Continuous light
• An error is present
Flashing
• There is an external error, see the “Error diagnosis” section.
Status 1/2
(IO-Link
device)
off
• HMI is connected.
Continuous light
• HMI is disconnected, IO-Link device has an error.
Flashing
• IO-Link device is disconnected.
Continuous light
• HMI is disconnected, IO-LINK device is open or closed at a standstill.
Continuous light
• HMI is disconnected, IO-LINK device is in motion or on the workpiece.
Ⓜ
Continuous light
• Actuator voltage OK
(P 24 V)
off
• Actuator voltage not OK
6.1.2 IO module LED display
Name
Status
Function
Continuous light
• Supply voltage OK
off
• HMI is disconnected, supply voltage is not OK.
• HMI is connected, supply voltage is OK.
Continuous light
• An error is present
Flashing
• There is an external error, see the “Error diagnosis” section.
Status 1/2
(IO-Link
device)
off
• HMI is connected, the IO module is inactive.
Continuous light
• Gripper has a motion task in the
release
direction.
Continuous light
• Gripper has a motion task in the
grasp
direction.
Ⓜ
Continuous light
• Actuator voltage OK
(P 24 V)
off
• Actuator voltage not OK
-
Inactive
-
INSTALLATION AND OPERATING INSTRUCTIONS:
SCM
DDOC00734 / c
EN / 2022-05-09
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
