ZIMM ZA-25, Инструкция по эксплуатации

Страница: 22 / 37

ZIMM Actuator 6 Installation
22 Version 0.6 2023
6.6 Correcting the alignment
If necessary, the alignment can be corrected without much trouble.

Spindle and anti-rotation lock lubricated (for more information
see section “7.2 Lubrication”, page 25)
Fig. 18: Correctly aligned ZIMM Actuator
1. Loosen the fastening screws on the gearbox housing and on the head.
2. Fully retract the jack (1).
3. Tighten the securing bolts.
4. Repeat the trial run (see section 6.5, page 20).
1