ZIMM ZA-25, Инструкция по эксплуатации

Страница: 27 / 37

7 Operation and maintenance ZIMM Actuator
2023 Version 0.6 32
Standard grease for all sizes: Tungrease BS
CAUTION
Unsuitable grease!
Damage to the spindle.

Do not use multi-purpose grease.

Do not mix greases.

When changing the grease: Clean the spindle then regrease it.

If necessary use special grease.

Use only greases that are approved by ZIMM GmbH.

ZIMM will be pleased to give advice.
WARNING
Warning: Burn hazards!
Operating temperature too high.

Let the ZIMM Actuator cool down.
1. Lubrication position SP1 or SP2 should approach ±2 mm.
2. Remove the protective cap from the grease nipple.
3. Press the connection of the grease gun onto the grease nipple.
4. Fill the lubricant.
NOTE
Simple greasing during operation.

Use an automatically controlled lubricator (e.g. PLC capable)
instead of grease gun.

ZIMM will be pleased to give advice.
Lubricants