ZIMM ZA-25, Инструкция по эксплуатации

Страница: 17 / 37

ZIMM Actuator 6 Installation
2023 Version 0.6 17
Bevel gear drive The T version can be turned round to change the direction of rotation.
Fig. 8: T version (bevel gear drive)

Check the direction of rotation at installation.
6.2 Fitting the couplings and connecting shafts

The ZIMM Actuator to be connected must have been fully installed.

The bevel gear drives must be installed where appropriate.
CAUTION
Moving parts!
Injuries due to rotating parts.

Switch off the entire system and secure it against switching on
again.
1. Place the connecting shaft on the shaft extensions (ZIMM
Actuator or bevel gear drives). Check that the gearboxes are
correctly levelled.
2. Secure the coupling half shells with attachment bolts tightened
to the following torques:
Connecting shaft Coupling Torque
VWZ-30 KUZ-KK-16 4 Nm
VWZ-40 KUZ-KK-24 8 Nm
VWZ-60 KUZ-KK-32 15 Nm
VWZ-60V KUZ-KK-35 35 Nm
VWZ-80 KUZ-KK-45 70 Nm
VWZ-100 KUZ-KK-60 120 Nm