ZIMM ZA-25, Инструкция по эксплуатации

Страница: 16 / 37

6 Installation ZIMM Actuator
16 Version 0.6 2023
Fig. 6: Flatness, parallelism and angular accuracy
1. Set up the ZIMM Aktuator and ensure compliance with the installation
accuracy, and ensure straight alignment of the spindle attachment (e.g.
with precision machine spirit level).
2. Install the ZIMM Actuator with bolts, tighten the installation bolts.
3. Mount the screws for sizes 50 and 100 of the ZA series on the
elongated holes with washers (e.g. according to DIN 1441). Mount
the spindle head (see Fig. 9), fix the locking screws with screw
locking (e.g. Loctite) and mount the lock nut (up to size 100).
Fig. 7: Fix parts such as Fixing flange, Forked end, Pivot bearing end,
Rod end, after setting the position.