43
/
59
Note
: Our camera works at wired connection with Ethernet cable as factory default,
so you should plug out the Ethernet cable to make it work at Wi-Fi connection after
passing the wireless setup.
8.2.3 Ddns
Ddns setup is mainly for remotely accessing the camera. You can use the hipcam
DDNS or a third-party DDNS like Dyndns.org/3322.org/dynddns.us/No-ip.com and
UPnP service with your camera. You can get the Internet IP address of your network
which your camera works on by click the “show” button.
8.2.4 Platform
Platform section will be removed in future, it’s useless now. This function has been
designed to connect some special platform.
