7 of 28
IP-LOGIC AV over IP Technical Manual
TM-003-0001-100-00 | July 15, 2019
© 2019 Zigen Corporation
www.zigencorp.com
ZIG-IPPro-TX
ZIG-IPPro-TX converts up to live HDMI 2.0 video to a visually lossless streaming network packet
for transmission over 10G network. The ZIG-IPPro-TX has a single 10GBaseT copper RJ-45
connector or optical connector (10G SFP+ Multi-mode or Single-mode Modules sold separately).
HDCP 1.4/2.2 content protection is supported for components such as Set-Top boxes, Blue-Ray
players, gaming consoles and other media players. A single ZIG-IPPro-TX can broadcast to an
almost unlimited number of IP-Logic Receivers.
HDMI extraction of downmixed 2-channel PCM audio is supported and played out on the ZIG-
IPPro-TX built-in analog L-R audio connectors. Other networked audio sources (HDMI Extracted
audio from other ZIG-IPPro-TX units, ARC from ZIG-IPPro-RX units, AES67, Dante, RAVENNA, and
Ethernet AVB, could be selected and played on the analog audio output.
ZIG-IPPro-TX devices have IR and RS-232 inputs and outputs. The inputs will be converted to
network streams to be broadcast to other IP-Logic endpoints. The signals from the outputs
originate from broadcasted streams from other IP-Logic sources.
ZIG-IPPro-TX feature a USB-Type B connector to interface with host devices such as computers.
The USB packets will be converted to network streams and broadcast to other IP-Logic endpoints
connected to USB devices such as Keyboards, Mice, Webcams, Thumb Drives, etc.
ZIG-IPPro-RX
Overview