TR660IP
12780-0702-02
Page
18 / 37
www.ziehl.de
- simulation
- Error messages
12
Web interface
If the device is connected to an Ethernet network, it can be parameterized conveniently via a web browser on
a computer.
12.1 Home
Status displays from
•
Sensors
o
min. / max. values
o
Alarm condition
•
Alarms
o
Value for „alarm on“
o
active delay times
o
Relay values
Individual values are hidden if the corresponding functions are not active.
12.1.1 Simulation
•
Simulation of:
o
Sensors = on/off
o
Sensors = measurement values
o
Relay = on/off
12.2 Configuration
Setting of the function parameters, description see "
Factory settings of the programs
12.3 System
•
Device Name (appears in the header of the website)
•
Version information (see "
Factory settings of the programs
")
•
LCD Display setting (see "
Factory settings of the programs
")
•
Code protection (see "
Factory settings of the programs
")
•
Firmware update TR660IP
o
Update notification (message if update is available)
o
Firmware status, if necessary, the firmware update can carry out via the update button
o
manual update installation:
▪
select firmware (select downloaded firmware)
▪
manual update installation (selected firmware will upload and install)
•
program update / add new programs
o
all currently installed programs are checked for the current version and can be updated
if necessary
o
new programs can be installed on the TR660IP
•
Configuration (recent changes to the device are saved with the date / time and the username,
see user management)
o
Save configuration (download the system configuration, to save and transfer to other
devices)
o
Load configuration (load a saved configuration into the device and activate it). An
activated user administration is deactivated in the process. No passwords are
transmitted.
•
Reset to default
o
Set factory reset (optionally with/without network parameters)
o
Reboot