39
Fig. 58
Baffle plate of the cross auger
The height of the baffle plate is adjusted via the
screw connection (V).
The clearance between the auger and the hood
should be as large as possible to allow sufficient
passage for corn leaf, leaf and even stalks.
Switch off the diesel motor when perform-
ing all work on the cornheader.
5.4 Cross auger
Fig. 59
Picker fittings
A series of overload protections and friction cou-
plings have been fitted to the machine to ensure its
secure operation.
Should these systems activate, deactivate the
picking front attachment immediately.
Switch off the diesel motor and secure
the picker against unintended lowering.
Locate the fault. Remedy the problem.
Never attempt to reactivate the picker through
activation and deactivation.
Fig. 60
Cross auger friction coupling
If the friction coupling activates, stop the machine
immediately and determine the reason.
An insufficient torque on the coupling cannot be
decisive for the activation
Regularly lubricate and tighten the chain drive.
V
Содержание CORN CHAMPION 5S
Страница 2: ......
Страница 3: ......
Страница 5: ......
Страница 45: ...MAINTENANCE AND CARE 45 Lubrication plan Perform the first check before commissioning the cornheader Fig 74 ...