Ziegler CORN CHAMPION 5S Скачать руководство пользователя страница 21

Страница: 21 / 64

INSTALLATION

Fig. 8

Transporting the machine on the company prem-

ises with a forklift truck

The transport frame is designed in such as way that

the cornheader can be secured to the frame so as to

prevent it falling out.

You can use the ZIEGLER transport frame to

transport the cornheader with a forklift truck.

We recommend driving at a walking pace.

You will require a crane in order to set the corn-

header in the transport frame

(See also “transporting the machine on the company

premises with a crane”).

4.2 Unpacking the cornheader

Fig. 10

Scope of delivery / state of delivery

The cornheader is delivered upright on a

transport frame.

Every dispatch is accompanied by a delivery slip.

Remove the shrink wrap and the packaging pieces

from the front attachment device.

Check the scope of delivery.

Check the delivered row clearance

Ensure that the machine is located in

a steady position

Fig. 9

Transport with the combine harvester

The fixed cornheader can be attached securely to

the combine harvester and be transported using the

ZIEGLER header trailer.

Содержание CORN CHAMPION 5S

































































Результаты поиска

Содержание CORN CHAMPION 5S

Отзывы:

Похожие инструкции для CORN CHAMPION 5S

Бренды по названию

Популярные бренды

Ziegler CORN CHAMPION 5S, Инструкция по эксплуатации и сборке

Результаты поиска

Содержание CORN CHAMPION 5S

Отзывы:

Похожие инструкции для CORN CHAMPION 5S

Бренды по названию

Популярные бренды