Ziegler CORN CHAMPION 10K, Инструкция по эксплуатации и сборке

Страница: 35 / 52

CHOPPER
35
37. Chopper
Diagram 47
Gears
(E) Bleeder
(K) Inspection glass
(W) Winding protection
Regularly control the oil filling level!
The bearing of the chopper is equipped with a lifetime lubrication
and maintenance-free.
Diagram 48
Arrangement of the chopper blades
Principally, the chopper knives (M) must be mounted with the
original socket above the knife carrier.
The screw (S) must be tightened according to the specifications of
the operating instructions located on Page 48.
Attention: The blades run after for 2 minutes.
At all work at the machine, shut down the motor and
activate the lowering safeguard!
1^2
Wear according protective clothing.
Diagram 49
Coupling or decoupling the chopper
Loosen the fastening screw and bring the lever to the wanted
position (it may be necessary to turn the chopper to enable the
coupling to engage) and subsequently retighten the fastening
screw.
At all work at the machine, shut down the motor and
activate the lowering safeguard!
K
E
W
M
S