Ziegler CORN CHAMPION 10K, Инструкция по эксплуатации и сборке

Страница: 29 / 52

TRIAL RUN
29
30. Trial Run
Diagram 32
Reduction of the starting torque
In order to reduce the startup forces, only let the corn header
run with reduced motor speed in idling position at startup. This
significantly increases the life of the drive couplings and belts.
It must be ensured that the horizontal choppers do
not come in contact with foreign matter.
Maintain a safe distance from the machine!
Protect yourself and others from damage and
accidents!
Control the operating speed.
Diagram 33
Perform trial run only in lowered condition
For safety reasons, it is necessary to start up or perform a
trial run with the header and chopper principally only in
lowered condition.
It must be prevented that any objects can reach into the header or
the chopper.
At all work at the machine, shut down the motor and
activate the lowering safeguard!
No persons may reside within the hazard area!
Risk of accidents due to parts flying about!
Diagram 35
Safety notice „Fast turning Blades“ "
Hazard due to parts that are hurled out at acti-
vated drive system!
Maintain a safety distance!
At running motor and activated drive system,
maintain sufficient distance from the chopper
blades!
Attention: The blades run after for 2 minutes.
At all work at the machine, shut down the motor and
activate the lowering safeguard!
Diagram 34
Protective housing for the stubble chopper
Before any commissioning, the completeness and the intactness
of the rubber protective housing must be verified.
In the event of damage, immediately exchange the protective
housing and detect and remedy the cause for the damage.
Control!

Completeness and intactness of the chopper knives

The balance, respectively the true running of the chop-
per knives

If there is sufficient clearance to the ground