Zicooler
TF-2902R Tower Fan
Instruction Manual
Contact email: [email protected]
Please read this manual carefully before use
Keep the manual in a safe place for reference
Product part name
Product Specifications and Parameters
Installation Instructions
1.Transparent cover
2.Push button
3.Remote control
4.Top cover
5.Back case
6.Front case
7.Power cord
8.Base
9.Foot pads
●Model：TF-2902R
●Rated voltage：120V ~ 60Hz
●Rated power：45W
●Net weight: approx. 2.7kg
●Product size: 260mm*260mm*750mm
①
②
③
④
Chassis Installation Steps
How to Use
Note:
Care and Storage
Contact email
Remote Control Battery Replacement
Remote Control Storage
Safety Precautions
Display Section
Remote Control
Control Section
1. Place the two base crosswise as shown in figure ①, and fasten the two ends.
2. Locate the two posts at the bottom of the fuselage near the centre and insert them into
the two holes at the top of the base as shown in figure ②.
3. Make the base and the bottom of the fuselage tight and then screw the base locking
mother clockwise onto the chassis as shown in figure ③.
4. Place the power cable into the bottom snap of the base, so that the chassis installation
is complete, as shown in Figure ④.
Plug in: Turn on the 120V-60Hz power supply, the power indicator will light up.
●On/Standby key: Press this button to turn on the fan when the power is off, press it again
to turn off the fan.
● Wind speed key：In the power on state, press this key to adjust the wind speed, there are
three gears to choose in cycle.
● Wind mode key: In the power on state, press this key to set the fan operation mode,
there are three air types to choose from: normal air - natural air - sleep air mode, press this
key to cycle through the choices.
● Timer key: Press this key to set the timer when the fan is on, there are 7.5 hours timer
options. Each press of this button adds 0.5 hours, 0.5H-1H-1.5H-2H-2.5H-3H-3.5H -4H-
4.5-5H-5.5H-6H-6.5H-7H-7.5H-Off .
● Oscillating head key: In the on state, press this key to turn on the oscillating wind
function, then press this key to turn off. Oscillation angle：70°
1. The normal wind and swing head functions of this machine come with
memory, but timing and power failure are not remembered.
2. The mute function on the remote control means that when the mute function is
switched on, there will be no buzzer "beep" sound when other function keys are pressed.
●Do not place foreign objects at the air inlet and outlet to avoid blocking the air path and
causing danger or reducing the airflow effect.
●Do not put water on the product, keep it away from fire, or inhale flammable and
explosive substances.
●Do not spray cleaning fluid or insecticidal water on the fan to avoid damaging the
plastic surface.
●If the product is not used for a long period of time, please close the power switch,
disconnect the power plug and store the product properly.
●No self-modification, repair or disassembly by non-professionals is allowed; in case of
malfunction, please cut off the power immediately and stop using the product.
●Make sure the machine is stable when you place it, do not tilt it or put it down for use.
●When moving the machine, disconnect the power cord first and lift the machine by the
carrying handle on the side of the product.
●Do not use fans in areas with high humidity, temperatures over 40°C or dusty areas.
●Do not allow disabled or mentally handicapped persons (including children) to use the
fan without supervision or instruction.
●Do not insert fingers or other objects into the fan blades when the fan is in use.
Please switch off and unplug the fan before cleaning.
◇Clean the outside of the fan: wipe with kitchen detergent, then wipe with a clean, soft
cloth.
◇Do not rinse the body directly with water.
◇Do not use thinner, toluene, acid detergent, lamp oil, alcohol or chemical wiping to avoid
discolouration or deterioration.
◇After cleaning, make sure to wait until it is sufficiently dry before using it with electricity. I
f you need to store it, please put the parts into the box in the original packing order and
place it in a dry place for proper storage.
If you have any questions, you can contact us via this email and we will give you a
satisfactory solution within 24 hours
Email address: [email protected]
● As shown above, press the locking tab A with your thumb, then pick the end of the
battery holder with your index finger and pull out the holder towards the arrow B to remove
the battery. When installing the battery, be sure to pay attention to the direction of the
"+" and "-" poles of the battery (as shown above), do not install the battery backwards.
Note: The battery type is: CR2025 3V lithium battery, do not install a different specification
type of battery.
● Please return the remote control to the top cover remote control storage compartment
when finished using it.
●Check that the voltage used matches the voltage label on the machine before use.
●When cleaning or moving the unit, you must first unplug it from the mains and grasp the
plastic part of the plug when removing it.
●Do not use wet hands to insert or remove the power cord as this may cause electric shock.
●Do not touch, overbend, stretch, twist, squeeze or otherwise damage the power cord;
do not replace the power cord yourself.
Battery holder
Remote control placement
1
3
5
4
2