Zhone zNID-GPON-2402 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 48

Zhone zNID-GPON-2402 Скачать руководство пользователя страница 15

zNID Hardware Installation Guide

15

Z

NID 24

XX

S

ERIES

This chapter describes the 24xx series of zNIDs. It includes the following
sections:

•

Overview, page 15

•

zNID 24xx series features, page 19

•

zNID 24xx models, page 20

•

zNID 24xx series specifications, page 22

•

zNID 24xx series dimensions, page 26

•

zNID 24xx series LEDs, page 27

•

Logging in to the 24xx series zNID, page 29

Overview

The zNID 24xx Series (Zhone Network Interface Device) is a family of
indoor residential GPON ONTs which are standards based Consumer
Premises Equipment (CPE) designed for advanced triple-play deployments.
The indoor models in Zhone's zNID product line of ONT's provide a lower
cost alternative to outdoor ONT solutions. The small package contains many
features including QoS, VoIP, and multicast video support. The zNID ONT is
only one component in the PON network. Zhone provides the entire FTTx
solution to our customers including the OLT, splitters, cabinets, and the ONT.

The 24xx indoor ONT is designed for high performance applications.
Depending on model hardware features include 10/100/1000Mbps LAN Ports
and POTS Voice FXS ports, RF video, WiFi and USB in a compact enclosure
for indoor use. zNID 24xx Series units may be installed as a desktop or, wall
mounted and is powered via an AC Adaptor.

The zNID 24xx Series are ideal for triple-play service deployments in
Fiber-to-the-Home/Premise application. Industry standard SIP and MGCP
voice signaling provides reliable voice services while Zhone's experience
with packet voice ensures interoperability and support with a large number of
soft switches.

All 24xx series Single Family Unit (SFU) ONTs provide the same voice
features found on the 42xx series of outdoor residential ONTs and 9xxx series
of outdoor Multiple Dwelling Unit (MDU) ONTs. SIP-PLAR signaling is

«
...
13
14
15
16
17
...
»

Содержание zNID-GPON-2402

















































Отзывы:

Нет отзывов