Zhone zNID-GPON-2402, Руководство по настройке

Страница: 93 / 226

Configuration pages
zNID 24xx Series Configuration Guide
93
Rules
The Configuration|Access Control|Rules page defines the access control list rules.
Figure 65: Defining the rules for access list
Table 34: Adding an access control rule
UI Label Description
Interface Selects the physical interface to which the configured
rule will apply. Changes made to the selection will
cause the access control filtering table for the selected
(and deselected) interface to change.
Rule Name A required user defined identifier for the rule. This
identifier must be unique per interface rule.
Source IP Address/
Prefix The IP address or subnet to filter. If the Prefix is 32
then the whole address is used. Otherwise the prefix
indicates the subnet to filter against. Example:
192.168.1.0/24 would filter against the 192.168.1
subnet.
Protocol Select either ICMP, IGMP, TCP or UDP.
Source MAC Address The MAC address to filter. MAC addresses have the
format AA:BB:CC:DD:EE:FF.
MAC Mask Mask by which to filter MAC address. For example a
MAC Mask of ff:ff:ff:00:00:00 would filter against the
first six digits of the MAC address.