Zhone zNID-GPON-2402, Руководство по настройке

Страница: 151 / 226

VLAN
zNID 24xx Series Configuration Guide
151
Modes
The Transparent LAN Service Settings screen allows the TLS parameters to
be set or modified.
Figure 115: Transparent LAN service settings
Table 56: In the VLAN editing screen, only the port membership for the VLAN
may be defined
UI Label Description
VLAN Service Mode •
Normal
All traffic must be encapsulated within a
configured VLAN tag. Untagged traffic will be
tagged upon LAN port ingress based on the
configured Port Defaults.
•
S-Tag
All traffic must be encapsulated within a
configured S-Tag. Untagged or single-tagged
traffic can be S-tagged upon LAN port ingress
based on the configured Port Defaults.
S-Tag Ethernet Type When S-Tag is selected, the S-Tag service type may be
selected. The outer S-Tag is identified by a unique Tag
Protocol Identifier (TPID). The IEEE standard value
for the TPID is 88A8 (hex), however older product may
use 8100, 9100, 9200, or 9300. The zNIDs provide
support for interaction with these older devices.
•
8100
•
88A8
•
9100
•
9200
•
9300