Configuring voice communications
Z-Edge 64 Configuration Guide
47
zSH> new atm-vcl 1-1-1-0-hdsl2/atm/0/37
Please provide the following: [q]uit.
vpi: ----------------------------- {0}:
vci: ----------------------------- {0}: 37
must be different than data VCI
admin_status: -------------------- {down}: up
receive_traffic_descr_index: ----- {0}: 2
the td_index from atm-traf-descr 2
transmit_traffic_descr_index: ---- {0}: 2
vcc_aal_type: -------------------- {aal5}: aal2
for voice
vcc_aal5_cpcs_transmit_sdu_size: - {9188}:
vcc_aal5_cpcs_receive_sdu_size: -- {9188}:
vcc_aal5_encaps_type: ------------ {llcencapsulation}:
vcl_cast_type: ------------------- {p2p}:
vcl_conn_kind: ------------------- {pvc}:
fault-detection-type: ------------> {disabled}:
....................
Save new record? [s]ave, [c]hange or [q]uit: s
New record saved.
AAL2 VCL profiles
The aal2-vcl-profile defines the type of AAL2 traffic (POTS or ISDN BRI)
and general AAL2 configuration settings of the VCL.
Note:
When a new atm-vcl record of the type AAL2 is created, the
Z-Edge 64 automatically creates an associated aal2-vcl-profile.
receive_traffic_descr_index
The index of the atm-traf-descr
profile used for this VCL. Both the
receive and transmit traffic descriptors
must be the same.
transmit_traffic_descr_index
The index of the atm-traf-descr
profile used for this VCL. Both the
receive and transmit traffic descriptors
must be the same.
vcc_aal_type
ATM adaption layer type.
Values:
aal5 for data
aal2 for voice
Default: aal5
Parameter
Description
