Zhone IMACS 8000, Руководство пользователя

Страница: 600 / 788

22-4 Server Cards
Model No.
Running Head
ACS-MCC Card User Screens and Settings MCC Card
Table 22-1. Main Screen Actions
Table 22-2. Main Screen Option Settings and Defaults
STATE
The State setting determines whether the port is active or inactive. Set the State to stdby
(standby) to disable the Ethernet port, or choose actv (active) to enable the port.
IPADDR
When configured for unnumbered interfaces, the IP Address setting identifies the global IP
Address of the MCC. This address is thus valid regardless of the state of the Ethernet port.
When configured for numbered interfaces, the IP address of the Ethernet port identifies the IP
address of the Ethernet interface only.
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Redraws the screen.
Copy Copies the contents of the current column to the next column. Useful if
you change a lot of entries in one column and want to repeat those changes
in subsequent columns.
< The “less than” symbol scrolls backward through the 128 ports associated
with this card.
> The “greater than” symbol scrolls forward through the 128 ports associated
with this card.
porT (C1-C3) The port option allows you to “jump” to a specific port. Enter the number
of the port you wish to see, press the <Enter> key, and the requested port
will be displayed. To return to the Main Screen, press “e” and then press
<Enter>.
Nstat Displays the Network Data Screen.
Main Returns to the System Main Screen. If changes are made to settings and
not saved, you will be prompted to save or lose changes.
Parameter User Options Default
STATE stdby actv stdby
IPADDR ip 0.0.0.0
NETMASK ip 0.0.0.0
DEF RT none stat dyn none
RIP off rx tx rx/tx off
SH off on off
WEIGHT 01-15 01
FMT-MAIN bxr hdlc bxr
FMT-SUB bxr hdlc bxr
IF-TYPE unnum num unnum