background image

16

 Warning

To avoid fire, serious injury, and property damage, observe the following safety 

guidelines when using, charging, or storing your batteries. 

Battery Use:

1.  Prevent the batteries to come into contact with any kind of liquid. Do not leave 

batteries out in the rain or near a source of moisture. Do not drop the battery 

into water. If the inside of the battery comes into contact with water, chemical 

decomposition may occur, potentially resulting in the battery catching on fire, and 

may even lead to an explosion.

2.  If the battery falls into water with the stabilizer during use, take it out immediately and 

put it in a safe and open area. Maintain a safe distance from the battery until it is 

completely dry. Never use the battery again, and dispose of the battery properly as 

described in the Battery Disposal section below. 

3.  If the battery catches fire, use water, water spray, sand, fire blanket, dry powder, 

or carbon dioxide fire extinguisher immediately to put out the fire. Battery-caused 

fire may lead to explosion. Please extinct the fire by applying the methods 

recommended above according to the actual situation. 

4.  Never use non-ZHIYUN batteries. If replacement or backup is needed, please 

purchase new batteries from ZHIYUN's official website or authorized channels. 

ZHIYUN takes no responsibility for any damage caused by non-ZHIYUN batteries.

5.  Never use or charge swollen, leaky, or damaged batteries. Never use or charge if 

the battery smells, or overheats (exceeding maximum temperature of 160 ° F/71 ° 

C). If your batteries are abnormal, contact ZHIYUN or a ZHIYUN authorized dealer for 

further assistance. 

6.  The battery should be used within the temperature range from -10 ° C to 45 ° C. 

Use of battery in environments above 45° C may lead to a fire or explosion. Use of 

battery below -10° C may lead to serious battery damage. 

7.  Do not use the battery in strong electrostatic or electromagnetic environments. 

Otherwise, the battery protection board may malfunction.

8.  Do not disassemble or use any sharp object to puncture the battery in any way. 

Otherwise, the battery may leak, catch fire or explode. 

9.  Do not mechanically strike, crush, or throw the battery. Do not place heavy objects 

on the battery or charger.

10. Electrolytes inside the battery are highly corrosive. In case of accidental contact of  

any electrolytes with your skin or eyes, rinse immediately with water for at least 15 

minutes and seek medical advice as soon as possible.

Disclaimer and Warning

 CAUTION : 

1.  SMOOTH-Q2 is a high-precision control device. Damage may be caused to 

SMOOTH-Q2 if it is dropped or subject to external force, and this may result in 
malfunction. 

2.  Make sure the rotation of the gimbal axes is not blocked by external force when 

SMOOTH-Q2 is turned on.  

3.  SMOOTH-Q2 is not waterproof. Prevent contacts of any kind of liquid or cleaner with 

SMOOTH-Q2. It is recommended to use dry soft cloth for cleaning.

4.  Protect SMOOTH-Q2 from dust and sand during use.

Safe Operation Guidelines

Содержание SMOOTH-Q2


























Отзывы: