background image

16

Disclaimer and Warnings

Safe Operation Guidelines

Warning:

1. Do not let the product come into contact with any kind of liquid. Do not leave 

product out in the rain or near any source of moisture. If the insides of the product 
come into contact with water, corrosion may occur, potentially resulting in the 
battery catching on fire, or even an explosion.

2. If the product catches fire, use water, water spray, sand, fire blanket, dry powder, 

or a carbon dioxide fire extinguisher immediately to put out the fire. Please 
extinguish the fire by applying the methods recommended above based on the 
actual situation.

3. The product should be used within the temperature range of -10° C to 45° C.
4. Do not disassemble the product in any way. If the battery is punctured during 

disassembly, the battery may leak, catch fire or explode.

5. Do not mechanically strike, crush, or throw the product. Do not place heavy 

objects on the product.

6. Do not heat the product. Do not put the product in a microwave oven or in a 

pressurized container.

7. Do not place the product near any heat source (such as a stove or heater), or put 

the product in a car on a hot day. Never expose the battery to any environment 
with temperatures of over 60° C. The ideal storage temperature is between 22° C 
to 28° C.

8. Do not leave the battery unused for too long after it has been completely 

discharged to prevent over-discharging of the battery, which may result in battery 
damage and permanent failure.

Caution: 

1. The SMOOTH-XS is a high-precision control device. Damage may be caused to 

the SMOOTH-XS if it is dropped or subject to external force, and this may result 
in the device malfunctioning. 

2. Make sure the rotation of the gimbal axes are not blocked by external force when 

SMOOTH-XS is turned on. 

3. The SMOOTH-XS is not waterproof. Do not let the SMOOTH-XS come into 

contact with any kind of liquid, including cleaning liquids. It is recommended to 
use a dry soft cloth to clean the SMOOTH-XS.

4. Protect the SMOOTH-XS from dust and sand during use.

Note:

1. Please disconnect the battery and charger when the device is fully charged.
2. If leaving the product unused for over 10 days, discharge the battery to 40%-65% 

for storage, which can extend the battery life.

3. Please charge and discharge the SMOOTH-X every three months to keep the 

battery active.

4. Keep the handle stable when powering on the SMOOTH-XS. Shakiness during 

power-on may cause the SMOOTH-XS to fail to start.

Содержание SM110

























Отзывы: