6
Wi-Fi Pairing
* Hereinafter referred to as image transmission transmitter.
1. Power on the image transmission transmitter first, and then power on the Visual
Controller VC100.
2. When you see the screen of the Visual Controller VC100, tap the Wi-Fi icon on the
upper left corner, select the Wi-Fi name of the corresponding image transmission
transmitter and enter the password (the default password is 12345678). When it's
successfully paired, the monitor will get the camera screen automatically.
① The Wi-Fi name for the image transmission transmitter can be found on the label
sticker which says "USER ID: XXXX." For more tutorials of the image transmission
transmitter, please visit the official website of ZHIYUN www.zhiyun-tech.com for
"TransMount Image Transmission Transmitter User Guide," "TransMount Image
Transmission Transmitter AI User Guide" or "ZHIYUN MasterEye Video Transmitter
VT100 User Guide".
② After the initial pairing, the Visual Controller VC100 will save the Wi-Fi
information of the image transmission transmitter and will automatically
connect to the transmitter's Wi-Fi in future use.
③ In situations where the image transmission transmitter is restored to factory
settings or has its Wi-Fi password changed or updated its firmware, please
perform the pairing procedure again.
④ Please perform the Wi-Fi pairing procedure in an environment with fewer
interruptions.
⑤ The image transmission transmitter can be connected to a maximum
of 3 devices, including mobile phones, tablets, and the Visual Controller
VC100. When the mobile phone or the tablet is connected with the image
transmission transmitter, please make sure that the distance between the
Visual Controller VC100 and the image transmission transmitter is more than
0.5m.
75
0
Wi-Fi
ZHIYUN_TECH_XXXX
ZHIYUN_TECH_XXXX
ZHIYUN_TECH_XXXX
ZHIYUN_TECH_XXXX
LIVE
75
The Visual Controller VC100 has to be used together with the image transmission
transmitter (TransMount Image Transmission Transmitter, TransMount Image
Transmission Transmitter AI, or ZHIYUN MasterEye Video Transmitter VT100). Please
perform the Wi-Fi pairing procedure when using it for the first time.
