Zhiyun Crane-M, Руководство пользователя

Страница: 21 / 38

16 zhiyun-tech.com
Roll Axis Roll Axis Roll Axis
Tilt Axis Tilt Axis Tilt Axis
Pan Axis Pan Axis Pan Axis
Introducing Gimbal Control Modes
Pan
Following
Mode
Double Press MODE
Single Press MODE
Double Press MODE
Single Press MODE
Single Press MODE
Single Press MODE
Mode Switch Schematic Figure
Locking
Mode
Following
Mode
P a n F o l l o w i n g M o d e : T h e
s m a r t p h o n e p a n s l e f t / r i g h t
following the movement of the
stabilizer while the tilt and roll axes
are locked. Push the joystick up/
down allows manual control of the
tilt axis.
Locking Mode: This mode locks
movement of all three axes to keep
the camera still and stable. Push
the joystick up/down and left/right
allows manual control of the tilt
axis and pan axis.
Following Mode: The camera
pans and tilts following the
movement of the stabilizer. Push
the joystick left/right allows manual
control of the roll axis.
Mode switch:
The stabilizer enters Pan Following Mode by default each
time when powered on. Switch into Locking Mode by single
pressing on the MODE button. Double press the MODE
button to enter the Following mode. Single press the MODE
button under the Following Mode will return to the previous
mode.Quick press MODE three times and the camera will turn
180° along the pan axis while the active control mode remains
unchanged.
See ZHIYUN's product training videos on
www.zhiyun-tech.com for more operation tips.