Maintenance and Installation Instructions
Edition 11.07.2006
29 of 30
Fill in the transmission oil at GK 40 (Possibility 2)
•
Clean magnet on the oil drain plug (Item
03) and always reattach it with a
new
sealing ring (Item 04). (See Fig. 14)
Tightening torque:
22 Nm
•
Fill in the transmission oil. For oil quantities
and viscosity classes see Chapter „Initial
Operation / Maintenance“ Paragraph „Oil
Grade“ & „Oil Capacity“
•
For filling use a funnel with hose.
Maximum outer diameter of the hose is
13 mm.
•
After filling in of the specified oil quantity
leave the transmission standing for 2
minutes.
•
The correct oil level and the correct oil
quantity is achieved when the oil level is at
the lower edge of the oil filler plug, at least
when oil penetrates at the oil filler plug.
•
Attach the oil filler plug (Item 01) with a
new
sealing ring (Item 02).
•
Tightening torque:
22 Nm
Figure 23
Remove spilled oil with a suitable oil binder.
After 25 operating hours check the oil level once again. Refill oil, if
necessary!
Technical Data of the GK – Product Range
GK – product range
GK 20
GK 25
GK 30
GK 40
Max. wheel load
kg
2000
2600
3400
4200
Max. wheel size
Ø
mm
310
350
406
406
Max. wheel size
mm
125
140
160
178
Max. wheel torque
Nm
980
1400
1700
2600
Max. speed
min
-1
4500
4500
4500
4500
Ratio
10,2 – 25,4
10,0 – 24,3
11,5 – 25,1
15,5 – 19,9
Envelope
mm
168
182
208
230
Temperature
range
°C
- 30 to + 40
- 30 to + 40
- 30 to + 40
- 30 to + 40
Weight, without oil,
E-motor, drive
wheel
kg
46
57
60
70
Subject to technical modifications.
02
01
