33 Installation and Operating Instructions V04
6.2 System monitoring via Ethernet
User can monitor the inverter through the integrated ComBox with Ethernet module
(optional), The connection diagram between the inverter and internet with
network
cable is shown as follows.
LAN
LAN
Inverter_1
Inverter_2
Inverter_n
LAN
With ComBox
With ComBox
With ComBox
Internet
Internet
ZeverCloud
The inverter has integrated ComBox (with Ethernet module),
The inverter is connected to the network by simply connecting the network cable
with wiring standard of EIA/TIA 568B from the router to the Ethernet port on the
ComBox inside the inverter, please refer to the relative instruction at section 6.1.
Possible reason of communication failure due to closed port
•
The ComBox uses port #6655 and #80 communicates with the ZeverCloud.
Both of these two ports must be opened, or else the ComBox cannot connect
to the ZeverCloud and upload data
