13 Installation and Operating Instructions V04
4.3 Mounting the inverter with the wall bracket
Mounting procedures:
1.
Use the wall bracket as a drilling template and mark
the positions of the drill holes, then drill 2 holes (
Φ
10)
to a depth about 70mm. During operation, keep the
drill vertical to the wall, and hold the drill steady to
avoid tilted holes.
2.
After cleaning the holes, place the 2 wall anchors into the holes, then attach the
wall bracket to the wall using the hexagon head screw delivered with the inverter.
Risk of injury when lifting the inverter, or if it is dropped
The inverter weighs approximately 11kg. There is risk of injury if the inverter is
lifted incorrectly or dropped while being transported or when attaching it to or
removing it from the wall bracket.
• Transport and lift the inverter carefully
Risk of injury due to damaged cables
There may be power cables or other supply lines (e.g. gas or water) routed in the
wall.
• Ensure that no lines are laid in the wall which could be damaged when drilling
holes.
