Web Server
~
24
~
6.3
Ethernet
Clicking the “Ethernet” tab takes you to the Ethernet page of the
ZeverCom/ZeverCom WiFi´s internal web page. From this page set the Ethernet
parameters can set by either using a static IP address or obtaining the IP address
automatically.
Fig. 6-4: Ethernet page
6.4
Advanced
The Advanced web page shows the advanced settings of the
ZeverCom/ZeverCom WiFi. For example the Multi-Function Switch and output
Power limit function can be configured. In addition the ZeverCom/ZeverCom
WiFi´s firmware can be upgraded from this webpage.
6.4.1
Power Management
The ZeverCom/ZeverCom WiFi can regulate the power of the inverter(s)
according to the value of installed inverter capacity or the energy meter reading,
which are set by the user.
a)
Active Power Limit
Tick “Active Power Limit” and fill in the total Inverter AC capacity to active Power
limit function. There are three modes of active power limitation which can be
selected.