ZETRON 4010, Руководство по программированию

Страница: 42 / 117

Section 4. Program Operation
4-6 025-9229C.1
Frequency Select Key, the program will display the send function window. If “Upon
Transmit Only” is selected, the function will be sent whenever the channel is
transmitted on. Selecting “Instantly” will cause the function to be sent when the key
is pressed. Selecting “Instantly and upon TX” will cause the function to be sent
immediately and when the channel is transmitted on. Select when you want the
function sent to the channel and press
ENTER .
When defining an Instant Select with Voting key, the program needs to know which
auxiliary input port to check for the voting input. When input X is closed, the
corresponding CALL lamp will flash on the Instant Select with Voting key. After
selecting a frequency, the program will display the Voting Aux Input window. Enter a
previously defined auxiliary input number, and press
ENTER .
Table 4-1. Key Categories — General
Channel Functions System Functions
Select Transmit Keys
Frequency Select Monitor
Frequency Select with Voting Site Intercom
Instant Select Alert
Instant Select with Voting Mute Keys
Instant Transmit Simultaneous Select
Volume Adjust (knob) Group Keys
Mute / Adjust (knob) Patch Keys
Volume Up (key) Priority Marker
Volume Down (key) Speaker / Headset
Volume Mute Diagnostics Reset
Patch Clock Set
Main / Standby ANI Keys
ANI Source Channel Test
Site Intercom Phone Keys
Monitor Paging Keys
Phone On/Off Hook
Phone Hook Flash
Extended Channel Functions Auxiliary Input / Output
CTCSS Select Auxiliary Input
Repeat On / Off Auxiliary Output Interlocked
Coded / Clear Auxiliary Output Toggle
Second Receiver Unmute / Mute Auxiliary Output Momentary
Wild Card I On / Off Spare Output Latching
Wild Card II On / Off Spare Output Toggle
Spare Output Momentary