![background image](http://html1.mh-extra.com/html/zetron/4000-series/4000-series_installation-manual_3536674077.webp)
77
Auxiliary I/O Card Installation (Optional)
Wiring to the Auxiliary Input/Output Card
Each Aux I/O Card uses two connectors inside the CCE. The card’s outputs use half of one
of the 50-conductor plugs, depending on which channel slot has the card inserted into it.
The card’s inputs use a special ribbon cable, with a red stripe on the edge, that is supplied
with the card. One end of the cable is split and terminated in two 26-pin connectors. The
other end contains a 50-conductor plug, like connectors J17-J22.
When shipped from the factory, the cable is generally installed on the card. For field
installation of the cable, the card must first be installed in the desired card slot. Any free
card-slot may be used since the address of the Aux I/O card is set by a switch. The cards in
the slots to the right of the Aux I/O card slot will have to be removed to install the cable
connectors. The split-end of the cable should be threaded through the two holes in the
bottom card cage bracket. The two small connectors on the split-end of the cable are
labeled “P2” and “P3” and should mate with the corresponding receptacles on the Aux
I/O card.
The ribbon cable should be secured with tie-wraps. The cable may be folded in fourths in
order to make it a convenient bundle. Secure the 50-conductor plug at the other end of the
cable to the mounting holes of the CCE with the hardware provided. See the following
figures for the various mounting locations.
Содержание 4000 Series
