ZETRON 4000 Series Скачать руководство пользователя страница 298

Страница: 298 / 418

IntegratorRDPS Programming

298

025-9533Y

Only one alias can be associated for each status number. When RDPS is first started, only

one (blank) user per configuration is defined. As a blank is filled, pressing ENTER over

the status alias field, or click NEXT to create another blink entry. Pressing the DONE

button saves the entry and exits the screen. To delete an entry, select the entry and click

DELETE.

Selecting a Status ID Alias

The record number field allows you to select the entry to be edited by using the associated

scroll bar. Please note that, when changing you number, the entry information shown is

automatically saved.

Entering Talk Group Definitions

The Define Lists/Talkgroup Definitions menu selection allows you to assign a one to 10

character alias, or name, to a talk group. This name is displayed on the console display

when a talk group call is received from a talk group.

The channel selection boxes allow you to associate aliases with one or more channels.

Using this feature, it is possible to associate one ID with several aliases unique to the

specified channel(s). The talk group definitions also define the list of groups that an iDEN

radio can scroll through using the talk group up and down buttons.

Adding or Removing a Talkgroup

When you start RDPS, only one alias per position is defined. As a blank is filled, pressing

ENTER after the talk group name field, or clicking NEXT, creates another blank entry.

Clicking the DONE button saves the entry and exits the scan. To delete a talk group, select

that talk group and click DELETE.

Selecting a Talkgroup Alias

The record number field allows the selection of a user for editing by using the associated

scroll bar. Please note that, when the user number is changed, the entry information is

automatically saved.

Entering the iDEN Talkgroup

You may associate up to 255 talk group numbers. Each group number may have several

aliases but those aliases can not have the same channels assigned to each of them.

Channels are not available (the Select Channels area is blank) if they have not yet been

programmed. See

Figure 73

Tip

Navigate to this area from the main window in RDPS by clicking

Define Lists, Talk Group Definitions

Содержание 4000 Series



































































































































































































































































































































































































































Результаты поиска

Содержание 4000 Series

Отзывы:

Похожие инструкции для 4000 Series

Бренды по названию

Популярные бренды

ZETRON 4000 Series, Руководство по установке

Результаты поиска

Содержание 4000 Series

Отзывы:

Похожие инструкции для 4000 Series

Бренды по названию

Популярные бренды