ZETRON 4000 Series, Руководство по установке

Страница: 212 / 418

Console Programming System
212 025-9533Y
5. If needed, repeat this procedure to copy the position layout to additional positions.
Position Cross Muting
The Position Cross Muting function lets you mute common channels between operator
positions when transmission is occurring. Using cross muting eliminates feedback
problems from physically close operator positions.

To configure Position Cross Muting
This feature requires at least two configured positions.
1. Click Edit, Position Configuration .
2. Use the up and down arrows next to the
Position
number to select the position to
enable cross-muting.
3. Click
Position Cross Muting
.
A cross muting dialog box opens.
4. Mark the checkbox for any position you wish to cross-mute. Clear the checkbox
for any position you wish to turn off cross-mute.
5. Click
Done
when you are finished.
Audio Controls
This function sets volume and speaker muting for each position.

To configure Audio Controls
1. Click Edit, Position Configuration .
2. Use the up and down arrows next to the
Position
number to select the position to
configure.
3. Click
Audio Controls
.
The Audio Controls dialog window opens.
4. Configure the audio control settings as needed. The following table explains each
setting:
Muted Audio Level *
This number (0 to 99) represents the percentage of total volume to be used
as a muted audio level for all channels of the position.
Minimum Audio Level * This number (0 to 99) represents the percentage of total volume to be used
as a minimum adjustable audio level for all channels of the position.
Default Volume Level *
This number (0 to 99) represents the percentage of total volume to be used
as a power-up default volume level for all channels of the position.
Speaker Mute while
Transmitting
When enabled, both select and unselect speakers will mute when you are
transmitting. Disable if you want speakers to remain unmuted.