manualshive.com logo in svg

ZETRON 025-9581M, Руководство по установке и обслуживанию

Поделиться
Скачать
ZETRON 025-9581M Скачать руководство пользователя страница 44

Creating the System Servers

44

025-9581M

Installing the VoIP Gateway Server

The machine does not have to be connected to the network in order to perform the VoIP 
Gateway Server installation. 

The VoIP Gateway Server requires a license in order to run after installation.

♦

VoIP Gateway Server Installation

1. Insert the IP FSA Suite CD in the computer’s CD or DVD drive. The installation 

routine should start automatically and display the opening screen. (If it does not, 
use the 

RUN

 command on the 

Start

 menu to browse the CD-ROM root directory, 

select the 

Autorun.exe

 file, and run it.)

2. From the opening screen, select the 

FSA VoIP Installation

 menu, select the 

FSA 

Voip Gateway Server

 option, and click the 

Install 'FSA Voip Gateway Server'

 

button. The installer for the server will start.

3. Follow the on-screen instructions of the installer.
4. When the installation is complete, you may remove the CD-ROM from the drive or 

continue on with the installation of the FSA VoIP Gateway Maintenance Utility.

5. On a Windows 7 PC, Service Pack 1 is known to cause instabilities, so the VoIP 

Gateway Server application should be configured with an all user compatibility 
mode of Windows 7 (without SP1).
a. Right-click 

VoipGatewayServer.exe

 in 

C:\Program Files 

(x86)\Zetron\Applications\Zetron FSA VoIP Gateway 
Server

, select 

Properties

 from the menu, select the 

Compatibility

 tab, and 

click the 

Change settings for all users

 button.

b. Ensure 

Run this program in compatibility mode for:

 is checked, and select 

Windows 7

 in the drop-down menu.

c. Click 

OK

 to exit each property window.

6. Click 

Start

, 

Control Panel

, 

Administrative Tools

, 

Services

.

7. On the 

Recovery

 tab, right-click

 Zetron FSA Voip Gateway Server 

service and 

select 

Properties

.

8. Set 

First failure

, 

Second failure

, and 

Subsequent failures

 to 

Restart the 

Service

.

9. Click 

OK

.

Note

Before installing any FSA software, ensure Windows is properly 
configured. See 

Preparing the Console Computer

 on page 37.

Note

The VoIP Gateway service runs in the background as a Windows 
service any time the machine is running. The default port for this 
service is number 43002.

Содержание 025-9581M





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды