ZETRON 025-9581M, Руководство по установке и обслуживанию

Страница: 175 / 196

Overview
175
Appendix C: Using a Model 620x in a
Model 26-based System
Overview
With the advent of the IP FSA system, Zetron has stopped manufacturing the Model 6
station transponder unit. This appendix is intended as sort of a FAQ section for installers
faced with utilizing a Model 6203 or Model 6204 station transponder in an existing Model
26-based system either as replacement for a failed Model 6 or as an expansion for the
system as a whole.
The good news is that the Model 6203 and 6204 units share a great deal with the original
Model 6 primary and secondary station transponder units. Utilizing them in this
application is mainly a matter of ignoring the IP interface and making use of controls and
settings that may not normally be used in an IP FSA system.
Figure 55: Model 6 Primary Station Unit versus a Model 6203
ALERT ALERT ALERT ALERT
XMIT PA
IN QUARTERS IN QUARTERS
AVAIL. ON AIR AVAIL. ON AIR
RESPONDING RESPONDING
ON SCENE ON SCENE
TRANSPORT TRANSPORT
OUT OF SVC. OUT OF SVC.
STA
ACK QRTRS
AIR
QRTRS
AIR
QRTRS
AIR
EMR
CLR
OUT
SRVC
OUT
SRVC
OUT
SRVC
MODEL 6 STATION TRANSPONDER
ALL STATION
EMERGENCY
ALERT ALERT ALERT ALERT
IN QUARTERS IN QUARTERS
AVAIL. ON AIR AVAIL. ON AIR
RESPONDING RESPONDING
ON SCENE ON SCENE
TRANSPORT TRANSPORT
OUT OF SVC. OUT OF SVC.
MODEL 6203 IP STATION UNIT
ALL STATION
EMERGENCY
XMIT PA
STA
ACK QRTRS
AIR
QRTRS
AIR
QRTRS
AIR
EMR
CLR
OUT
SRVC
OUT
SRVC
OUT
SRVC