ZEROXCLUB Instructions Manual
13
TROUBLESHOOTING
Monitor will not power
up /does not work
1. Check to make sure the power
source is active (if your cigarette
lighter is switched with vehicle
ignition, your monitor will only work
when the vehicle is running or the key
in the ON position).
2. Check to make sure the 12V car
charger are in working order.
3. With power applied to the monitor,
press power button
4. If the monitor doesn
’
t work even
though camera battery is fully charged
It may the camera doesn't turn on or
the camera loose pairing. Please
press the On/Off switch to turn on
monitor again
5. If ii doesn
’
t work, please re-pairing
the monitor to the camera as following
steps:
①
Power the monitor and wait for the
the green light of the camera flashers
and press M button to enter the menu
and access pair icon.
②
Choose pair the camera and press
M button to confirm
③
The monitor is pairing and the
monitor show the camera image. The
pair is done.