ZEROXCLUB Instructions Manual
10
Settings Operation
PAIRING Operation
The Wireless Backup Camera is pre-paired
with the Monitor, and it is set as rear camera as
default. You should see the screen that shows the
rear view if the Monitor is powered and the
Wireless Backup Camera is fully charged.
*
If you can not see camera image showing on monitor, pair the camera
with the following steps:
Pairing the Camera
*
Keep the camera and monitor closer when pair them (within 3 feet).
1
Please make sure the antenna is mounted on the monitor. And power on
monitor.
②
The green light of the camera flashes rapidly.
2
Press
button to access the menu and choose
the PAIRING
icon, and then press
button to select and enter the pairing panel.
③
Press
button again for select
the camera pairing icon.
④
Wait a few seconds for the camera view appear and complete pairing.
⑤
If no camera is found, then the display will not show the image. In this
case, cut off power and reboot the monitor. If you keep receiving no image