Zeroplus X One SE, Руководство пользователя

Страница: 4 / 22

How to install
1. Plug the X One SE into the lower connector of the controller.
2. Flip over to the back of the controller.
3. Insert the normal end of the X One SE cable into the back connector of the X
One SE.
4. Press and hold the cable so that it is flat against the controller.
5. Insert the flat end of the X One SE cable into the top connector of the controller.
LED
燈號 狀態
Blue LED Permanently on X One SE and console are currently
connected.
Blue LED Blinking Wired device is not connected
Wireless device is searching for connection…
Blue LED and Red LED Blinking
alternately
Wireless connection mode is ON
Searching for pairing device…
Red LED Blinking Turbo-Remap button is being pressed
LED off Power Off / Entering Turbo-Remap Settings