Zeroplus LAP-F1 Скачать руководство пользователя страница 58

Страница: 58 / 140

LAP-F1 Logic Analyzer

User Guide v1.6

| www.zeroplus.com.tw

sorting the files.

Update time and increment

version number

In the example above the file names would become;

FileName154512 and FileName155547(1); this is the

default selection.

Save files under new names Files will overwrite each other if this option is not checked.

It is therefore common to combine this option with the

Save As function.

File Name + Date + File

Version

Add the date [Year, Month, Day] and version number after

the file name. Ex: August 25

2015 becomes

ZP-Logic_20150825(1).

File Name + Time + File

Version

Add the time (Hour, Minute, Second) and the version

number after the file name. Ex: 13:45:02 pm becomes

ZP-Logic_134205(1); default selection.

File Name Preview

Preview the name of files to be saved.

Table 4:13 Save settings dialog box description

If the “Auto Add the Serial No” and is not activated, “Keep time from first save;

increment version number only” and “Update time and increment version number”

will be disabled. In other words, any new file that is saved will overwrite the existing

file.

4.12.

Exit

Exit ZP-Logic. The software prompts users to save unsaved files.

Hot Key: ALT + F4.

Acquisition

Press ALT + A to open this Main Menu item with the keyboard.

Содержание LAP-F1













































































































































Результаты поиска

Содержание LAP-F1

Отзывы:

Похожие инструкции для LAP-F1

Бренды по названию

Популярные бренды

Zeroplus LAP-F1, Руководство пользователя

Результаты поиска

Содержание LAP-F1

Отзывы:

Похожие инструкции для LAP-F1

Бренды по названию

Популярные бренды