The cursor is shown in the Channel field.
The channel is selected using the numeric keypad or cursor keys. Press the ENT key to move between the Channel
and Law fields.
When the cursor is in the Law field, the cursor keys cycle through the laws.
The currently selected law for the channel is indicated by a ‘*’, for example:
Channel: 10
Law: Normal*
Reset Laws
This option allows you to reset the dimmer laws for all dimmer channels.
Select the Dimmer Laws option from the top level menu options, and press the ENT key to enter the Dimmer Laws
menu.
Select the Reset Laws option from the menu, and press the ENT key. The screen shows:
Push ENT key to
reset all laws
Press the ENT key to set the state of all dimmer laws to normal. The screen will briefly show a confirmation, and
then return to the Dimmer Laws screen.
Pressing the ESC key at any point will return the screen to the top level Dimmer Laws screen and leave the dimmer
laws unchanged.
Topset
The Topset function is used to apply a scaling factor to the final output level of a channel, such that the input control
range gets compressed into a smaller output range.
For example - If the input level of a channel is 80% and the Topset level of the channel is 50%, the output level will be
80% x 50% = 40%.
Select the Topset option from the top level menu options, and press the ENT key to enter the Topset menu. The
following two options are available:
Zero 88 - Spice - Page 32 of 47
Printed: 10/03/2021 09:32:33 ES
