DMX Fail Modes
Hold DMX
In HTP Mix mode, the last DMX input levels are held in the dimmer and mixed in as normal.
In DMX Precedence mode, the DMX inputs are removed from the output calculations.
Fade To Black
The DMX Input values and any memory or sequence being output are faded to black (0%) over 3 seconds.
Fade To Memory
If the dimmer is not outputting a memory or sequence, the outputs fade to the specified backup memory. If the dimmer
is outputting the backup memory, the outputs fade to that memory. If the dimmer is outputting a different memory or
sequence, the outputs will fade or snap to the memory or sequence.
In Standard mode the above statements apply to all dimmer channels.
In ChilliNet mode the above statements are applied to the channels on an area basis, since each area could be
outputting a different memory or sequence at the time of DMX failure.
RDM
Select the RDM option from the menu, and press the ENT key. The screen shows the current setting for the
dimmer, for example:
< RDM Control >
RDM is On
Zero 88 - Chilli Pro - Page 41 of 60
Printed: 23/03/2021 09:13:40 ES
