manualshive.com logo in svg

Zero DS 2013, Руководство пользователя, Страница: 80 / 124

Поделиться
Скачать
Zero DS 2013 Скачать руководство пользователя страница 80

General Maintenance

5.16

1. Remove the key from the key switch.

2. Press the Tension Tester steadily to the middle of the 

upper side of the belt. The “lip” will lead the tester on to 
the belt.

3. Slowly increase the pressure on the tester, until you 

hear a clicking sound. Do not increase the pressure 
after the tester has clicked.

4. Remove the tester carefully from the belt. Avoid rough 

movements of the tester, as this would change the 
results of the measurement. The measurement should 
be in the range of 20-30 kg.

Drive Belt Adjustment Procedure

1. Remove key from the key switch.

2. Loosen the rear axle nut (C). 

3. Loosen left and right (A) jam nuts (13mm) in order to 

make adjustments. 

4. Turn adjustment bolt (B) to adjust belt tension.

5. Tighten left and right jam nuts (A) to secure the belt.

6. Tighten the rear axle nut (C). 

7. Test ride the motorcycle. 

8. Recheck the belt for proper adjustment after the test 

ride and readjust, if necessary.

Zero Owner's Manual (S and DS).book  Page 16  Friday, April 26, 2013  4:55 PM

Содержание DS 2013





























































































































Отзывы:

Нет отзывов