ZERO-X ZX-BTZ, Руководство пользователя, Страница: 4 / 16

4
1. WELCOME
Thanks for purchasing a Zero-X Blitz Drone, get ready to have the time of your life!
We’re sure your Zero-X Blitz drone will bring you a world of great experiences in
the air. Please take the time to read the following safety warnings and operating
instructions carefully.
BEFORE YOU GET UP IN THE AIR
Unwind and connect the charging cable to the Lithium polymer balance charger
and then plug the Lithium polymer balance charger into a power outlet using the
included power cord. When the charger is powered the 3 LEDs will slowly flash
green and red.
Once your Lithium polymer balance charger is set up and powered, connect
the charging cable to the Blitz battery via the port labelled “Charger”. When the
Blitz battery is charging the LEDs on the charger will shine red, once charging is
complete all 3 LEDs will change from red to green.
While your Blitz drone is charging please take the time to read the instructions
and familiarise yourself with the controls, maintenance and operation of the
Zero-X Blitz Racing Drone.
GENERAL SAFETY
Please familiarise yourself with your local legislation regarding drone usage before
you begin using your Zero-X Blitz drone. Included in the package contents of
your Zero-X Blitz drone are the Australian CASA guidelines, please read carefully
and understand this information as operating a drone outside of these guidelines
may result in legal issues. The manufacturer takes no responsibility for operation
of this product outside of what is legally permissible in your local area.
• Do not fly your Blitz drone any closer than 30 metres from people, animals, or
buildings, and check to make sure you are no closer than 5.5 kilometres
from any airfields or airports.
For more information on CASA’s Australian legislation visit:
http://www.casa.gov.au/ For information outside Australia please visit the
website of your local aviation authority.
• Do not attempt to modify the Blitz drone or any of its components in any way,
doing so will void your warranty and may affect the operation of the drone.
• Do not use the Blitz drone in any conditions that could affect, damage or
impair your view of the Blitz drone including rain, wind, snow, fog or low light.
• Avoid getting your Blitz drone wet, dusty or sandy. These elements will damage
the components of your Blitz drone.
• Please pay attention to the indication of low battery to avoid damage to your
Blitz drone, or your surroundings.
• Please do not attempt to touch the Blitz drone when the Remote Control is
powered on or if the rotor blades are turning.
• When flying your Blitz drone, please keep in mind the privacy of others.
• Do not power off the remote control without first disarming the motors. Failing
to complete this will cause the Blitz to go into lost signal mode which will cause
the rotor blades to spin.