_18
Capture the skies.
™
5. MAINTENANCE
5.1 CLEANING:
Avoid exposing your Raven+ and its accessories to dust, sand and moisture
as these can damage the Raven+. If the Raven+ is exposed to dust
or sand, use a soft brush to remove any visible particles.
ROTOR BLADE REPLACEMENT:
1.
Use the included screwdriver to remove
the screw on the top of the Rotor Blade.
2.
Gently remove the Rotor Blade.
3.
Ensure that you are replacing the
Rotor Blade with the correct blade as
there are two different orientations of
blades which are labeled A and B on the underside of the blade.
(Refer
to Fig 5.1.1)
IF THE INCORRECT BLADE IS USED IN THE INCORRECT PLACEMENT
THE RAVEN+ WILL NOT WORK.
Different colour Rotor Blades are used
front and back on your Raven+ so it is
easy to identify the front and rear of the
Raven+ when flying. To ensure that it is
easy to fly the Raven+ make sure that
the front and rear blades are different
colours.
4.
Gently push the replacement Rotor
Blade into place. Replace the screw
being careful not to over tighten. If
the screw will not fit in place, remove
the screw and make sure that the holes on both the Rotor Blade and
the rod are aligned.
(Refer to Fig 5.1.2)
6. PARTS AND ACCESSORIES
We understand that it’s not always easy learning how to fly a drone, and
sometimes a close call can turn into a crash landing. To thank you for your
support of Zero-X and your drone purchase, we would like to help you build
you confidence in learning how to fly your drone. We would like to offer you
50% off your first two orders of any spare parts, by using the codes in the
coupons below - visit www.zero-x.com.au.
ZXRBRVBW
Rotor Blades for Raven+
– Black and White
ZXRBRVVP
Rotor Blades for Raven+
– Value Pack
ZXBATRV700
700mAh Battery for Raven+
ZXCHRVDR
Battery charger for Raven+
A
B
*Fig 5.1.2