15_
Capture the skies.
™
4.6 FLIPPING AND STUNTS
The Raven+ can perform 360 flips in any direction by pushing the Flip
Button, and then pushing the Right Thumbstick (Pitch / Roll) in the
direction you want to flip the drone.
(Refer to Fig 4.6.1)
Please ensure that
you have a 2 metre
clearance below, and
in all directions around
the drone before
attempting to flip as
this manoeuvre requires
considerable space.
4.7 USING YOUR CAMERA
The camera on the Raven+ is controlled via the Video and Photo buttons
on the remote control to the left of the LCD screen.
When you are intending to use the camera, please ensure that you have
inserted a Micro SD card (not included) into the Micro SD card slot in the
Raven+.
The light on the camera will shine green when a Micro SD Card is detected,
and it is ready to record video or take still photos.
If the light on the camera does not activate, try re-inserting the Micro SD
Card and restarting the Raven+.
4.8 SHOOTING VIDEO
To start recording video, push the Video Button on the remote control.
The light on the camera will start flashing red indicating that recording is
in progress. To stop recording push the Video Button again and the light
on the camera will return to shining green. Ensure you have stopped
recording before removing the Micro SD Card, or turning the power off
on your Raven+.
4.9 SHOOTING PHOTOS
To take a photo with your Raven+ press the Photo Button on the remote
control. The light on the camera will flash red once and then return to
green.
4.10 TILT THE CAMERA
The Camera can be angled up and down while on the fly to capture
either a bird’s eye view of forward facing footage.
To tilt the camera up and down use the Camera Tilt Controls on the Remote
Control.
To save power the Camera Tilt function deactivates when the Raven+
drone’s battery is low. To reactivate these controls, charge the drone’s
battery and re-launch the Raven+.
*Fig 4.6.1