_10
Capture the skies.
™
C.
Align the clips on the camera with
the slots on the underside of the
drone making sure the camera
is facing the front of the drone
(indicated by the battery hatch).
(
Refer to Fig 3.1.3)
D.
Slide the clips into place ensuring
that the clips lock into place.
Once connected, please avoid disconnecting or detaching the camera.
3.4 INSTALLING A MICRO SD CARD
With the Raven+ upside down and facing away from you insert the Micro
SD card into the rear of the camera ensuring that the text side of the
Micro SD Card is face down and the notched side of the card is on the
left side.
Gently press the card in until you hear the lock click into place.
(*Micro SD Card not included)
3.5 INSTALLING/REMOVING ROTOR GUARDS
Rotor Guards are an optional fitting on the Raven+, however for safety
reasons we strongly advise you to attach them. Whether Rotor Guards
are attached or not, please be very careful when handling the drone. To
avoid injury, do not touch the drone while the blades are turning or the
remote control is powered on.
• Line up the guide pegs on the Rotor Guards with the holes on the arms
of the Raven+ so that the screw in the Rotor Guard matches up
with the screw hole in the Raven+.
*Fig 3.1.3
Firmly press the Rotor guard
into position.
Using the included screwdriver tighten the
screws making sure not to
over tighten.
1
2