ZERO-X RAPTURE HD ZX-RHD, Руководство пользователя

Страница: 9 / 24

9
*Fig 2.2.4
REMOTE CONTROL LCD SCREEN DIAGRAM
1
3
4
5
6
2 7 8
1. Connection
2. View Footage / Photos
(Micro SD card must be inserted
into the FPV screen to view)
3. Shoot Video Footage
(Micro SD card must be inserted
in the Rapture HD Drone to shoot
video footage)
4. Shoot Still Photo
(Micro SD card must be inserted
in the Rapture HD Drone to shoot
still photos)
5. Brightness Up
6. Brightness Down
7. Micro SD Card in
camera icon
8. Micro SD Card in FPV
icon
3. SETTING UP YOUR ZERO-X RAPTURE
HD
3.1 CHARGING THE BATTERY
Fully unwind the included USB charging cable and plug the USB end into
the included USB wall charger. Only use the USB charging cable and wall
charger included with the Rapture
HD
. If you are unable to use the supplied
wall charger, please ensure that the charger that you use is C Tick certified
and has an output minimum of DC 5V/1A and maximum of DC 5V/2.1A.
Chargers above or below this range can potentially damage the battery and
charger. When connected to a charging source the LED light in the charger
will glow green. Connect the drone battery to the charging cable and the
light will glow red indicating charging is in process. The LED on the USB
charging cable will begin to glow green again once charging is complete. To
keep the battery life as long as possible avoid removing the battery from the
charging cable before charging is complete. If you have just finished flying
your Rapture
HD
, please allow the battery to cool down for at least 30 minutes
before recharging.
• If the battery is being charged by computer, make sure to pull out the USB
cable if you want to shut down the computer.
• When connecting the USB cable with the battery, make sure to follow the
correct polar indicator.
• When Flying the Rapture
HD
, low battery will be indicated when the remote
control starts beeping and the lights on the Rapture
HD
start flashing.