Z 1500/2000-135/155/175
Powering up the tail lift
51
www.zepro.com
Figure 78.
Connection to the fuse box
1
2
3
4
7
Powering up the tail lift
1. If applicable, ensure that the main switch is in the "Off" position.
2.
If applicable, ensure that the cab switch (CS) is in the "Off" position.
3.
When using a fuse box, connect the cable (1) to the battery’s positive terminal and to the fuse box and
place the fuse (2) above, see Figure 78.
4. When connecting directly to the positive battery terminal, place the fuse (2) on the positive terminal,
see Figure 78.
5.
Connect the main power cable (3) to the fuse box / positive terminal, see
Figure 78 - Figure 79.
6.
Screw tight the cable connections and fuse with the knob (4). Install the cables at 90° or 180° from each
other. Install the fuse at right angles to the cables; see Figure 78 - Figure 79.
IMPORTANT!
The knob must bear against and centre the cable lug so that it does not come into contact with the screw. Incorrect installation
can cause the fuse to be ineffective. Risk of fire in the event of a short circuit.
7.
Install the fuse box cover.
8.
Where fitted, set the main switch to the ON position.
9.
Where fitted, set the cab switch to the ON position.
Figure 79.
Connection to the battery's positive terminal
Figure 80. Correct installation
Figure 81.
Incorrect installation
Figure 82.
Cover, fuse box
2
3
4
Содержание Z 1500
Страница 2: ......
