ZEPCAM T2 Series, Инструкция по эксплуатации

Страница: 27 / 27

27
1. Reset the T2 by pressing the right button on the back of the camera
2. On the docking station, when the LED in front of the camera is Flashing
Green/Red, an Error occurred and user interaction is needed. Remove the
T2 from the docking station and place it again firmly in docking station.
3. Make sure the Zepcam T2 is not recording when docked.
4. Reset the T2 docking station by using a blunt pointed object (e.g. pencil,
paperclip) to push the button. (Small hole on the right side of the docking
station).
5. If 1, 2, 3 and 4 are not the solution, try a different position on the docking
station.
T2 PROBLEM SOLVING
HOW TO SOLVE THEM
If the Zepcam T2 behaves oddly, or does not respond to button presses: