Zenty 153, Руководство пользователя

Страница: 25 / 37

(844) 200-1945 | sales@zenty.com Page 25 of 37 Copyright © Zenty AV
Camera Version: Display camera version information
AF Version: Display the focus version information
3.3.6 Restore Default
Move the pointer to the (RESTORE DEFAULT) in the Main Menu, click the [Home] key and enter the
(RESTORE DEFAULT sub menu) as follow:
Restore Default: YES/NO. Color style and video format cannot be restored to factory default
*NOTE: If the address of the former remoter is not 1 but another one from 2, 3, 4, the corresponding
camera address will restore to 1 when all parameters or system parameters are restored. User should
change the remote address to be 1 (press No. 1 according to the camera to get normal operation).
4. Serial Port Communication and Control
The camera could be controlled through RS232/RS485 interface, RS232C serial parameters are as
follows:
Baud Rate: 2400/4800/9600/115200 bits / sec
Start bit: 1
Data bits: 8
Stop bit: 1
Parity: None
After powering on, the camera first goes left, then back to the middle position. Self-test is finished after
the zoom moves to the farthest and then back to the nearest position. If the camera saved 0 preset
before, it will revert to that position after initialization. At this point, the user can control the camera by
the serial commands.