Zenoah GZ330 Скачать руководство пользователя страница 9

Страница: 9 / 132

not correctly lubricated, the risk of wear on the guide

bar, saw chain and chain drive sprocket increases.

Assembly

Introduction

WARNING:

Read and understand the

safety chapter before you assemble the

product.

To assemble the guide bar and saw

chain

1. Move the front hand guard rearward to disengage

the chain brake.

2. Remove the bar nut and the clutch cover.

3. Assemble the guide bar onto the bar bolt. Move the

guide bar to its most rear position.

4. Install the saw chain correctly around the drive

sprocket and put it in the groove on the guide bar.

WARNING:

Always use protective

gloves when you assemble the saw

chain.

5. Align the hole in the guide bar with the chain adjuster

pin and install the clutch cover.

6. Tighten the bar nuts finger tight.
7. Tighten the saw chain. Refer to

To adjust the tension

of the saw chain on page 29

for instructions.

8. Tighten the bar nut.

Note:

If the clutch cover is not easy to remove,

tighten the bar nut, engage the chain brake and

release. A click is heard if it is released correctly.

2392 - 003 - 26.03.2024

Содержание GZ330





































































































































Результаты поиска

Содержание GZ330

Отзывы:

Zenoah GZ330, Руководство оператора, Страница: 9 / 132

Результаты поиска

Содержание GZ330

Отзывы: