manualshive.com logo in svg

Zenoah GZ330, Руководство оператора, Страница: 24 / 132

Поделиться
Скачать
Zenoah GZ330 Скачать руководство пользователя страница 24

4. Remove the muffler cover.

5. Loosen the screws and nuts. Remove the muffler

and make sure that the muffler has no damage.

Carburetor without adjustment

limitations
Note: 

If you do not know which carburetor type that

you have on your product, speak to your servicing

dealer.

H

L

Basic adjustments and run-in

The basic carburetor adjustments are done at the

factory. The basic adjustments are high speed needle

(H) = 1⅛ turns and low speed needle (L) = 1¼ turns.
To give the components of the engine sufficient

lubrication during run-in, adjust the idle speed. Adjust

the idle speed to 600-700 rpm below the recommended

maximum idle speed.

CAUTION: 

If the saw chain rotates

at idle speed, turn the idle speed screw

counterclockwise until the saw chain stops.

To adjust the low speed needle (L)

1. Turn the low speed needle clockwise and

counterclockwise to find the highest idle speed.

2. Turn the low speed needle (L) ¼ turn

counterclockwise from the position of the highest idle

speed.

L

+ 1/4

To adjust the idle speed screw (T)

1. Start the product.
2. Turn the idle speed screw clockwise until the saw

chain starts to rotate.

24

2392 - 003 - 26.03.2024

Содержание GZ330





































































































































Отзывы:

Нет отзывов